Lexmark 2480 - Manual (Page 76)

72
Loading paper
16 Open the operator panel cover to access layer 2.
17 Press LineFeed, Micro
↑
, or Micro
↓
to move
the paper to the Top-Of-Form.
18 Press Set TOF to set Top-Of-Form.
Top-Of-Form is not saved if the printer is turned
Off or runs out of paper when using the pull
tractor.
19 Make sure the printer is online (Ready light is
On solid).
If not, press Start/Stop until the Ready light is
On solid.
Loading a cut form or envelope
Cut forms can be a single sheet, an envelope, or a
multiple-part form. They are placed one at a time into
the manual feeder.
Note: If you have installed the optional Auto
Sheet Feeder or Tractor 2 Feeder, refer to
the documentation shipped with your
option for paper loading instructions.