Lexmark 2480 - Manual (Page 34)

30
Operator panel
Using the Load/Unload feature
Load/Unload works only when the tractor unit is in the
push position. For information, see “Changing tractor
positions” on page 33.
Use the Load/Unload feature to unload continuous
forms from the printer while you print on either a cut
form or envelope. You can also use the feature to load
continuous forms into the printer when the paper path
is clear. For information, see “Loading continuous
forms” on pag e46.
Locking/unlocking the operator panel
To restrict the use of printer functions to just the
Start/Stop, FormFeed, Tear Off, and Load/Unload
buttons, you can lock the operator panel. When the
panel is locked, the padlock light
comes On.
1 Turn the printer Off.
2 Press and hold Load/Unload and Tractor while
turning the printer On.
To unlock the operator panel, repeat steps 1 and 2.
Selecting Tractor mode
If you installed the optional Tractor 2 Feeder, you can
press Tractor to switch between the normal tractor
feeder and the Tractor 2 Feeder. The Tractor 2 light
comes On when the Tractor 2 Feeder is selected.
Note: Before you switch tractor feeders, tear off
excess paper.