Lexmark 2480 - Manual (Page 48)

44
Loading paper
Setting the forms thickness lever
Use the forms thickness lever to adjust printing on
various forms, depending on the paper thickness. See
the following table when setting this lever.
Forms thickness for 2480/2481
Paper type
Paper
thickness
Paper weight
Forms thickness lever
setting
Single forms (cut
or continuous) Thin 56 g/m² (15 lb)
65 g/m² (16 lb)
1
Single forms (cut
or continuous) Normal 68 g/m² (18 lb)
75 g/m² (20 lb)
1 or 2
Thick 90 g/m² (24 lb) 2
Notes:
• Print quality depends on the multiple-paper quality and the operating environment.
Printing at low temperature may cause poor print quality, depending on the paper
used.
• When the setting is 4 or higher, printing speed becomes slower.