Lexmark 2480 - Manual (Page 104)

100
Using Setup mode
Data menu options
Data options
Use these menu
options
When you want to …
Buffer • Select minimum to set the receive buffer size to zero.
• Select maximum for 2480/2481 printers to set the buffer
size to 64KB or 96KB, depending on whether NLQ II (Near
Letter Quality) Download is enabled.
• Select maximum for 2490/2491 printers to set the buffer
size to 47.5KB or 79.5KB depending on whether
Download is enabled.
Auto LF Requires a line feed to occur.
• Set to On, a line feed is performed for each Carrier
Return (CR) received.
• Set to Off, a line feed does not occur when a CR code is
received.
Auto CR Requires a carrier return to occur.
• Set to On, a carrier return is performed for each line feed
received.
• Set to Off, a carrier return does not occur when a line
feed code is received.
Zero Slash • Turn Zero Slash On, to print a zero with a slash down the
middle instead of a numeric zero.
• The factory setting of Zero Slash is Off.
Download for NLQ II
Note: Available for
2480/2481 printers only.
Use NLQ II.
• Select Enable to reserve a portion of the receive buffer
for downloading fonts. The factory setting is Enable.
• Select Disable to use the entire buffer as a receive buffer.
Download
Note: Available for
2490/2491 printers only.
Allocate your printer buffer.
• Select Enable to reserve a portion of the receive buffer
for downloading fonts. The factory setting is Enable.
• Select Disable to use the entire buffer as a receive buffer.