Kenwood VR-5900 - Manual (Page 65)

57
Using P
o
w
erT
ouch
How Do I Operate Devices?
Tuner
To tune in to a radio station:
1. Touch (HOME1) on the Quick Access menu.
2. Touch . This accesses the tuner commands:
3. Tune in the station.
• Touch to change bands.
• Touch to switch from Auto tuning to Manual tuning or
Manual tuning to Auto tuning. Select Manual if you experience
interference due to weak radio signals. (Stations are received in
mono during manual tuning.)
In Auto tuning mode, the stereo mode is activated automatically
when a stereo station is tuned in (FM band only).
• Touch the left or right arrow to tune in a station.
• Touch and enter the broadcast frequency using the
10key pad. (e.g.; To select FM 87.5 MHz, enter 8, 7, 5, 0 and )
• Select the left or right end arrow to cycle through
any stations stored in memory.