Kenwood VR-5900 User Manual

Page 37

Using P

erT

ouch

How Do I Adjust the Surround?

3. When you select Dolby PL II: Music, you can change the settings of

Panorama mode, Dimension and Center Width.

1) Panorama mode setting: Touch the

button to switch the

parameter on and off alternately.

2) Dimension setting: Touch the

button on the left of

to switch the setting to R-1, R-2 and R-3. Touch the

button on the right of

to switch it to F-1, F-2 and

F-3.

3) Center Width setting: Touch the

button on the left of

to decrease the expansion to the left and right. Touch

the

button on the right of

to increase it.

Description of Dolby Pro Logic II: Music mode

Panorama mode : Expands the image of front-channel stereo to the

surround speakers to create a sound environment that
fills your surroundings.

Dimension

: This controls the balance between the Front and Rear

in 3 steps on the front and 3 steps on the rear. Set this
parameter to one of the Front steps if the surround
effect is too strong, or to one of the Back steps if it is
too weak.

Center Width

: The center channel signal can be divided and distrib-

uted to the Front L/R channels.

The adjustment for distributing the center channel
signal to the front channels can be applied in eight
steps from 0 to 7.

Use this adjustment when the center image seems to
be too strong.

The Center Width parameter has no effect when Cen-
ter speaker is set to Off or No.