Kenwood VR-5900 - Manual (Page 33)

25
Using P
o
w
erT
ouch
How Do I Adjust the Surround?
÷ THX Sur EX ON
The input signal is decoded automatically into 6.1-channel signals
if the input signal is Dolby Digital or DTS and contains two differ-
ent types of surround channel signals.
The THX function is activated.
÷ THX Sur EX AUTO
The input signal is decoded into 6.1-channel signals only when the
input contains the Dolby Digital Surround EX encoded identifica-
tion signal.
The THX function is activated
÷ THX ON
The THX operation is activated. (6.1channel decoding will not be
applied.)
÷ THX OFF
The THX Surround EX and THX operations are deactivated.
÷ When playing Dolby Digital Surround EX-encoded software in 6.1 chan-
nels, it is required to set the THX Surround EX mode to On or Auto.
Note that some of Dolby Digital Surround EX-encoded software does
not contain the identification signal. In this case, set the THX Sur EX
mode to On.
÷ Set the THX mode to Off when DTS-ES decoding is required.
÷ The THX operation is not activated with the 96 k fs PCM signal.