Kenwood VR-5900 - Manual (Page 34)

26
Using P
o
w
erT
ouch
How Do I Adjust the Surround?
To Set the Listen Mode manually
1. Touch (Listen Mode) on the Quick Access menu to open the Listen
Mode menu:
2. Select a Listen Mode you want.
Operation on the receiver:
Press the LISTEN MODE button inside the door repeatedly until the
listen mode to be set is displayed.
After 5 seconds, the display of the set listen mode returns to the previous
display.
• The available listen modes may be restricted depending on the input
signal and speaker setup.
• In FULL AUTO mode, if the incoming signal is not Dolby Digital,
DTS, DTS-ES or MPEG, the listen mode reverts to the last listen mode
you selected for that input.
• When the speakers A are set to Off or speakers B are set to On, the
listen mode is switched to STEREO.