Kenwood VR-5900 User Manual
Page 23
15
Using P
o
w
erT
ouch
How Do I Adjust the Sound?
Operation on the receiver:
1. Press the SOUND button inside the door repeatedly until the name
of the speaker(s) to be adjusted is displayed.
C : center speaker
S : surround speakers
SB : surround back speakers
SW : subwoofer
2. Press the MULTI CONTROL (
%/fi) button to select the desired
volume level, then press the SOUND button repeatedly until “SOUND
FIXED” is displayed.
These settings automatically return to the level you adjust on Chapter
Two of Connection and Setup Guide whenever you select a different source
device or turn the receiver’s power off.
Muting Sound
Use following method to temporarily mute the sound:
•
Press MUTE button on PowerTouch.
A “Mute On” message appears on the LCD screen for 3 seconds, then
disappears. The MUTE indicator on the receiver panel blinks during
muting.
Use one of the following methods to cancel muting:
•
Press either Mute button again.
•
Adjust the volume control on either the receiver or PowerTouch.
The MUTE indicator on the receiver panel goes off.