General features – Kenwood KDC-MP635 User Manual
Page 8
8
|
English
General features
Volume
Increasing Volume
Turn the [VOL] knob clockwise.
Decreasing Volume
Turn the [VOL] knob counterclockwise.
Attenuator
Turning the volume down quickly.
Press the [ATT] button.
Each time you press the button, the Attenuator
turns ON and OFF.
When the Attenuator is ON, the "ATT" indicator
blinks.
Audio Control
1
Select the source to adjust
Press the [SRC] button.
Refer to
2
Enter Audio Control mode
Press the [VOL] knob.
3
Select the Basic Audio item to adjust
Press the [VOL] knob.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
4
Adjust the Basic Audio item
Turn the [VOL] knob.
Adjustment Item
Display
Range
Rear Volume
"REAR VOLUME"
0 — 35
Subwoofer level
"SUB-W LEVEL"
–15 — +15
System Q
"USER"/"ROCK"/
"POPS"/"EASY"/
"TOP40"/"JAZZ"/
"NATURAL"
User/Rock/
Pops/Easy/
Top 40/Jazz/
Natural
Bass level*
"BASS LEVEL"
–8 — +8
Middle level*
"MIDDLE LEVEL"
–8 — +8
Treble level*
"TREBLE LEVEL"
–8 — +8
Balance
"BALANCE"
Left 15 — Right 15
Fader
"FADER"
Rear 15 — Front 15
Exit Audio Control mode (Volume control mode)
* You can adjust these items in detail. Refer to the detail of Audio Control>(Page8). (Function of KDC- * Source tone memory: Puts the set up value in the memory per source. (Detail Audio item is included) ⁄ About System Q • You can recall the best sound setting preset for different types of music. • Change each setting value with the (page 10). First, select the speaker type with the Speaker • "USER": The ranges selected lastly for Bass level, Middle level, and Treble level are recalled automatically. 5 Exit Audio Control mode Press any button. Function of KDC-X791 Adjusting the detail of Audio Control Among the Basic Audio items, you can adjust the Bass 1 Select the Basic Audio item Select the desired item to be set in detail from 2 Enter Detail adjustment mode of Audio Control 3 Select the Detail Audio item to adjust Press the [VOL] knob. 4 Adjust the Detail Audio item Turn the [VOL] knob. Bass level Adjustment Item Display Range Bass Center Frequency "BASS FRQ" 40/50/60/70/80/100/
X791)
setting.
Press a button other than the [VOL] knob and [ATT]
button.
level, Middle level, and Treble level in detail.
followings;
• Bass level
• Middle level
• Treble level
For how to select Basic Audio items, see
Press the [VOL] knob for at least 1 second.
Each time you press the knob, the item to be
adjusted alternates between the items shown in
the table below.
120/150 Hz