Connecting wires to terminals – Kenwood KDC-MP635 User Manual
Page 44
44
|
English
Connecting Wires to Terminals
P.CONT
ILLUMI
ANT.
CONT
MUTE
EXT.
CONT
FRONT L
FRONT R
REAR L
REAR R
–
+
SUB
WOOFER
REAR
FRONT
REMO.CONT
FM/AM antenna input
Front left output (White)
Front right output (Red)
Fuse (10A)
Wiring harness
(Accessory1)
White/Black
Gray/Black
Green/Black
Purple/Black
White
Gray
Green
Purple
To front left speaker
To front right speaker
To rear right speaker
To rear left speaker
Ignition wire (Red)
Battery wire (Yellow)
Ground wire (Black)
· (To car chassis)
Ignition key
switch
Car fuse box
(Main fuse)
ACC
Car fuse
box
Battery
If no connections are made, do not let the wire come out from the tab.
Power control wire (Blue/White)
Motor antenna control wire (Blue)
Dimmer control wire (Orange / White)
When using the optional power amplifier, connect to its power
control terminal.
To car light control switch
Depending on what antenna you are using, connect either to the
control terminal of the motor antenna, or to the power terminal
for the booster amplifier of the film-type antenna.
Sub Woofer left output (White)
Sub Woofer right output (Red)
To connect the Kenwood navigation system, consult your
navigation manual.
TEL mute wire (Brown)
Connect to the terminal that is grounded when either the
telephone rings or during conversation.
To connect these leads, refer to the relevant instruction
manuals.
To Kenwood disc changer/ External optional accessory
Rear left output (White)
Rear right output (Red)
Do not remove the cap
when you do not use the
USB cable. The connector
will cause the unit to
malfunction if it gets in
touch with any metallic
part of the vehicle.
• Fasten the connector
with the tape so that the
cable will not come off.
USB connector (1m)
(KDC-X791/MP735U only)
To USB device
To "EXT.AMP.CONT." terminal of the amplifier
having the external amp control function.
(KDC-X791 only)
External amplifier control wire (Pink/Black)
To use the steering wheel
remote control feature,
you need to an exclusive
remote adapter (not
supplied) matches your
car is required.
Steering remote control
(Light Blue/Yellow)
(KDC-X791 only)
AUX input (Stereo)
Use the mini-plug which is stereo type and does
not have any resistance.
(KDC-X791/MP735U only)
Tape