beautypg.com

Menu system – Kenwood KDC-MP635 User Manual

Page 36

background image

36

|

English

Menu system

In Audio file source

Supreme Setting

When AAC, MP3 or WMA files encoded at a low bit
rate (less than 96kbps (fs= 44.1k, 48kHz)) are played,
this function restores their high frequency region
to approach the sound quality of equivalents of
these files encoded at a high bit rate. Processing is
optimized for the compression format used (AAC,
MP3, or WMA), and adjustment is made for the bit
rate used.

Display

Setting

"Supreme : ON"

Plays sound using the Supreme function.

"Supreme : OFF"

Plays the original sound stored in the audio file.

• The sound effect may be imperceptible depending

on the relationship between the audio file format and
setting.

• This function is not available on iPod.

Function of KDC-X791
Other than Standby mode

B.M.S. (Bass Management System)

Adjust the bass boost level of the external amplifier
using the main unit.

Display

Setting

"AMP Bass : Flat"

Bass boost level is flat.

"AMP Bass : +6"

Bass boost level is low (+6dB).

"AMP Bass : +12"

Bass boost level is mid (+12dB).

"AMP Bass : +18"

Bass boost level is high (+18dB).

• Refer to the catalog or instruction manual for power

amplifiers that can be controlled from this unit.

• For amplifiers, there are the models you can set from Flat

to +18 dB, and the models you can set from Flat to +12
dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass : +18" will not work
correctly even if it is selected.

Function of KDC-X791
Other than Standby mode

B.M.S. Frequency Offset

Setting the central frequency, boosted by B.M.S.

Display

Setting

"AMP FREQ : Normal"

Boost with the normal central frequency.

"AMP FREQ : Low"

Drop the normal central frequency 20%.

Other than Standby mode/
When the Dual Zone System is ON

Dual Zone System Setting

Setting the Front channel and Rear channel sound
in the Dual Zone System.

Display

Setting

"Zone 2 : Rear"

Sub source (Auxiliary input source) is to be rear
channel.

"Zone 2 : Front"

Sub source (Auxiliary input source) is to be front
channel.