General features – Kenwood KDC-MP635 User Manual
Page 10
10
|
English
General features
Speaker Setting
Fine-tuning so that the System Q value is optimal
when setting the speaker type.
1
Enter Standby
Press the [SRC] button.
Refer to
Select the "STANDBY" display.
2
Enter Speaker Setting mode
Press the [VOL] knob.
"SP SEL" is displayed.
3
Select the Speaker type
Turn the [VOL] knob.
Each time you turn the knob, the setting alternates
between the settings shown in the table below.
Speaker type
Display
OFF
"OFF"
For 5 & 4 in. speaker
"5/4inch"
For 6 & 6x9 in. speaker
"6x9/6inch"
For the OEM speaker
"O.E.M."
4
Exit Speaker Setting mode
Press the [VOL] knob.
Subwoofer Output
Turning the Subwoofer output ON or OFF.
Push the Control knob toward down for at least
2 seconds.
Each time you push the knob, Subwoofer output
switches ON and OFF.
When it is ON, "SUB WOOFER ON" is displayed.
TEL Mute
The audio system automatically mutes when a call
comes in.
When a call comes in
"CALL" is displayed.
The audio system pauses.
Listening to the audio during a call
Press the [SRC] button.
The "CALL" display disappears and the audio system
comes back ON.
When the call ends
Hang up the phone.
The "CALL" display disappears and the audio system
comes back ON.
⁄
• To use the TEL Mute feature, you need to hook up
the MUTE wire to your telephone using a commercial
telephone accessory. Refer to
Function Control mode
To set up various functions of this unit, select tree-
structured function items.
1
Enter Function Control mode
Press the [FNC] button.
2
Select your desired setup item
Select a setup item using the Control knob.
Operation type
Operation
Movement between items
Turn the Control knob.
Selection of item
Press the Control knob.
Return to previous item
Press the [FNC] button.
Functions of items are as follows:
Display
Icon
Function of setup item
"Menu"
"MENU" Allows you to set up the environment. Refer
to