Tuner features – Kenwood KDC-MP635 User Manual
Page 22
22
|
English
Tuner features
Function of remote control
Direct Access Tuning
Entering the frequency and tuning.
1
Select the band
Press the [FM] or [AM] button.
2
Enter Direct Access Tuning mode
Press the [DIRECT] button on the remote
control.
"– – – –" is displayed.
3
Enter the frequency
Press the number buttons on the remote
control.
Example:
Desired frequency
Press button
92.1 MHz (FM)
[0], [9], [2], [1]
810 kHz (AM)
[0], [8], [1], [0]
Cancelling Direct Access Tuning
Press the [DIRECT] button on the remote
control.
Station Preset Memory
Putting a station in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Select the frequency to put in the memory
Push the Control knob towards [
4] or [¢].
3
Enter Preset Memory mode
Using the Control knob, select "P.MEM".
For the operation method, refer to
4
Select the number to put in the memory
Turn the Control knob.
5
Determine the number to put in the memory
Press the Control knob.
6
Allow the determined number to take effect
Press the Control knob.
Cancelling the Preset Memory mode
Press the [FNC] button.
Auto Memory Entry
Putting stations with good reception in the memory
automatically.
1
Select the band for Auto Memory Entry
Push the Control knob towards [FM] or [AM].
2
Open Auto Memory Entry
Press the [AME] button for at least 2 seconds.
When 6 stations that can be received are put in the
memory Auto Memory Entry closes.
Preset Tuning
Recalling the stations in the memory.
1
Select the band
Push the Control knob towards [FM] or [AM].
2
Enter Preset Tuning Select mode
Turn the Control knob.
3
Select a desired station in the memory
Turn the Control knob.
4
Recall the station
Press the Control knob.
Cancelling Preset Tuning
Press the [FNC] button.
⁄
• This function can be operated with [1] — [6] button.
- Press the desired [1] — [6] button.
⁄
• This function can be operated with [1] — [6] button.
-
Press the desired [1] — [6] button for at least 2 seconds.