Kenwood KDC-MP635 - Manual (Page 42)

42 | English
Basic Operations of remote control
Audio Control
[AUD] button
Selects the Audio item to be adjusted.
[VOL] buttons
Adjusts the Audio item.
⁄
• Refer to (page 8) for the operation
method, such as the procedures for Audio control and
others operations.
• The remote control can only select and adjust the Basic
Audio item. Selecting and adjusting of the Detail Audio
item cannot be done.
Dual Zone System
[2-ZONE] button
Each time you press the button, "2 ZONE" of
(page 9) is turned ON or OFF.
[ 5]/ [∞] buttons
Adjusts the volume of the rear channel.
The rear channel activates while the Dual Zone
System is ON.
In Tuner source
[FM]/ [AM] buttons
Selects the band.
Each time you press the [FM] button, the band
alternates between the FM1, FM2, and FM3 bands.
[ 4]/ [¢] buttons
Tune up or down band.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.
[DIRECT] button
Enters and cancels the
(page 22) mode.
In Disc/USB source
[ 4]/ [¢] buttons
Going forwards and backwards between music.
[ + ]/ [ – ] buttons
Going forwards and backwards between disc/
folders.
[ 38] button
Each time you press the button, the music is played
or paused.
[0] — [9] buttons
When in (page 25) and
(page 25), enters the music/
disc number.
In Satellite radio source
[FM] button
Selects the preset band.
[ 4]/ [¢] buttons
Searches up or down channels.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset channels.
[DIRECT] button
Enters and cancels the
(page 22) mode.
In HD Radio source
[FM] button
Selects the HD FM band.
Each time you press the [FM] button, the band
alternates between the HF1, HF2, and HF3 bands.
[AM] button
Selects the HD AM band.
[ 4]/ [¢] buttons
Tunes up or down bands.
[0] — [9] buttons
Press buttons [1] — [6] to recall preset stations.