Kenwood KDC-MP635 User Manual
Page 39
English
|
39
Other than Standby mode
Audio Preset Memory
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
-
2
Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to
"MENU" is displayed.
3
Select Audio Preset mode
Turn the Control knob.
Select the "Audio Preset" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Memory
Turn the Control knob.
Select the "Memory" display.
6
Determine whether to put the Audio Preset in
the memory
Press the Control knob.
"Memory?" is displayed.
7
Put the Audio Preset in the memory
Select "YES" using the Control knob.
"Memory Completed" is displayed.
8
Exit Audio Preset mode
Press the [FNC] button.
⁄
• Register 1 pair of Audio Preset Memory. You cannot
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
Other than Standby mode
Audio Preset Recall
Recalling the sound setup registered by
1
Select the source
Press the [SRC] button.
Refer to
2
Enter Menu mode
Using the Control knob, select "MENU".
For the operation method, refer to
"MENU" is displayed.
3
Select Audio Preset mode
Turn the Control knob.
Select the "Audio Preset" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Recall
Turn the Control knob.
Select the "Recall" display.
6
Determine whether to recall the Audio Preset
Press the Control knob.
"Recall?" is displayed.
7
Recall the Audio Preset
Select "YES" using the Control knob.
"Recall Completed" is displayed.
8
Exit Audio Preset mode
Press the [FNC] button.
⁄
• The User memory of "SYSTEM Q" in
(page 8) is changed to the value which was recalled.
• The source tone memory item of
8) is changed to the value which was recalled by the
selected source.