Kenwood KDC-MP635 User Manual
Page 17
English
|
17
⁄
• Like your vehicle’s speedometer, G-Analyzer is no more
than a measuring function. The HP or G value measured
by this unit may not be completely accurate due to its
simplified method of measurement. The G-Analyzer is
only for reference and should not be used to confirm the
horsepower specifications of your vehicle.
• Measuring after starting the car lowers the accuracy.
• The record will not be renewed if the measurement is
discontinued.
• The graph’s scale adjusts automatically to the
horsepower value.
• The value of max power and record can be reset by Analyzer Reset> (page 17). Display Type F G-Analyzer Reset Resets the value of G-Meter, G-Counter and G- 1 Enter G-Analyzer Reset mode Using the Control knob, select "DISP" > "GMA" 2 Select the Reset item Turn the Control knob. Display Setting "Meter Reset" Reset the value of G-Meter. "Power Reset" Reset the value of G-Analyzer Horsepower "Counter Reset" Reset the value of G-Counter. 3 Determine the item you want to reset Press the Control knob. 4 Reset the value Select "YES" using the Control knob. 5 Exit G-Analyzer Reset mode Press the [FNC] button. Display Type F G-Counter Level seting Calibrating G-Point. Setting the level according to 1 Enter G-Counter Level setting mode Using the Control knob, select "DISP" > "GMA" 2 Select the G-Counter Level Turn the Control knob. Display Setting "Level1" Counter is easy to go up. "Level2" … "Level3" Counter is hard to go up. 3 Exit G-Counter Level setting mode Press the Control knob. ⁄ • In the case of driving situations calling for few accelerations, set the G-Point up to "Level1". In the case
Analyzer Horsepower Analysis.
> "RESET".
For the operation method, refer to
"G-RESET" is displayed.
Analysis.
"Reset OK" is displayed.
the kinds of vehicles.
> "LEVEL".
For the operation method, refer to
"G-COUNTER LEVEL" is displayed.
of frequent accelerations, set it up to "Level3".