Do’s and don’ts - wiring (cont’d), Do not – KVH Industries KVH TracVision User Manual
Page 19
54-0239
TracVision A5 Shop Manual
© 2004 KVH Industries, Inc., All rights reserved.
DO NOT...
• DO NOT route the antenna cable where it may become chafed.
• DO NOT disconnect the two short cables that connect from one
jack to another on the receiver’s rear panel. The system will not
work if these cables are disconnected.
• DO NOT connect any other type of receiver to the TracVision
system.
Do’s and Don’ts - Wiring (cont’d)
Effective April 2004
Subject to change without notice
Do’
s & Don’ts