KVH Industries KVH TracVision - Manual (Page 15)

54-0239 TracVision A5 Shop Manual © 2004 KVH Industries, Inc., All rights reserved.
DO...
• DO remove all wire shipping restraints from underneath the
antenna.
• DO get another person’s help to lift the antenna.
• DO install all three TORX screws at each mounting bracket.
• DO apply threadlocker (Loctite 425) to the threads of the
mounting screws if you are reusing them. Be careful not to drip
threadlocker on the vehicle.
• DO allow at least 1" clearance between antenna and roof.
• DO make sure the antenna is securely attached to the vehicle.
• DO make sure the roof rack crossbars are securely fastened to
the vehicle, if you are mounting the antenna to the roof rack.
• DO inform the customer of the vehicle’s height with the antenna
installed.
DO NOT...
• DO NOT flip the antenna upside down to remove restraints.
• DO NOT attempt to lift the antenna by yourself.
• DO NOT use any substitute mounting hardware.
• DO NOT twist or bend the antenna frame.
Do’s and Don’ts - Antenna
Effective April 2004
Subject to change without notice
Do’
s & Don’ts