KORG TRITON Musical Instrument - Manual (Page 37)

TRITON Training Guide
35
5. The insert effect selections are posted in the upper -right of the display. The arrow is pointing to IFX1
because the BUS Select has been set to send the oscillator signal to insert effect 1. In Program D071,
insert effect 1 is a St. Graphic 7 -band EQ, and it is chained to insert effect 2 (IFX2) - this means the
signal passes through IFX1 to IFX2 (Rotary Speaker), as denoted by the arrow in the upper - right and
(Chain) in the display. You can copy and swap insert effects, and write the Program from the page menu
tab.
6. Press the Insert FX tab (bottom). In this page you can select the type of effect, chain, on / off status,
pan, bus and send levels.
Work with an Insert effect:
7. Press the IFX1 tab (bottom). This page lets you edit insert effect 1 parameters. Press the IFX2 tab to
view insert effect 2's edit page (IFX 3 - 5 do not have effects assigned in Program D071). Note the Src:
and Manual Speed Ctrl: parameters in IFX2 - by using knobs 2, 3 and the Joystick +Y position, you
can control the Rotary Speaker effect - take a moment to work with these controllers now.