KORG TouchView Trinity ProX - Manual (Page 141)

15: Stereo Long Delay
137
size4
15: Stereo Long Delay
This is a stereo delay, and can by used as a cross-feedback delay effect in which the delay sounds cross
over between left and right by changing the feedback routing. You can set a maximum of 1,360msec for
the delay time.
a Stereo/Cross Stereo, Cross
Switches between stereo delay and cross-feedback
delay.
b L Delay Time [msec] 0.0…1360.0msec Sets the delay time for the left channel.
c R Delay Time [msec] 0.0…1360.0msec Sets the delay time for the right channel.
d
Feedback –100…+100 Sets feedback amount.
Src None…Tempo Modulation source of feedback amount
Amt –100…+100 Modulation amount of feedback amount
e High Damp [%] 0…100% Damping amount in the high range ☞ P.44
f Low Damp [%] 0…100% Damping amount in the low range ☞ P.44
g
Input Level D-mod: Src None…Tempo Modulation source of the input level ☞ P.44
Amt –100…+100 Modulation amount of the input level
h
Spread –100…+100
Sets the width of the stereo image of the effect sound.
☞ P.65
Src None…Tempo
Modulation source of stereo image width of the effect
sound
Amt –100…+100
Modulation amount of stereo image width of the effect
sound
i
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
Delay
Delay
Stereo/Cross
Left
Right
Feedback
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Input Level D-mod
Input Level D-mod
High Damp Low Damp
High Damp Low Damp
Spread Stereo/Cross