KORG TouchView Trinity ProX - Manual (Page 67)

12: Stereo Decimator
63
size2
12: Stereo Decimator
This is a stereo decimator.
a Pre LPF Off, On
Selects whether the harmonic noise caused by a
decrease in sampling frequency is generated or not.
☞ P.28
b
Sampling Freq [Hz]
(Sampling Frequency)
1.00k…24.00kHz Sets the sampling frequency.
Src None…Tempo Sets the modulation source of the sampling frequency.
Amt –24.00k…+24.00kHz Sets the modulation amount of the sampling frequency.
c High Damp [%] 0…100% Ratio of cut of the high range
d
Wet/Dry Dry, 1:99…99:1, Wet Sets the balance between the effect and dry sounds.
Src None…Tempo Modulation source of effect balance
Amt –100…+100 Modulation amount of effect balance
Left
Right
Wet / Dry
Wet / Dry
Stereo In - Stereo Out
Pre LPF
Pre LPF
High Damp
High Damp
Sampling Frequency
Decimator
Decimator