KTI Networks KS-2262 User Manual

Page 26

͒͒͒͒CCCCSet IP Address, Subnet Mask and Default Gateway IP Address

Please refer to Fig. 2-7 CLI Management for details about factory setting. They are
default setting of IP address. You can first either configure your PC IP address or
change IP address of the switch, next to change the IP address of default gateway
and subnet mask.

For example, your network address is 10.1.1.0, and subnet mask is 255.255.255.0.
You can change the switch’s default IP address 192.168.1.1 to 10.1.1.1 and set the
subnet mask to be 255.255.255.0. Then, choose your default gateway, may be it is
10.1.1.254.

Default Value

24 FAST

Your Network Setting

IP Address

192.168.1.1

10.1.1.1

Subnet

255.255.255.0 255.255.255.0

Default Gateway

192.168.1.254 10.1.1.254

Table 2-3

After completing these settings in the switch, it will reboot to have the configuration
taken effect. After this step, you can operate the management through the network,
no matter it is from a web browser or Network Management System (NMS).