KTI Networks KS-2262 - Manual (Page 228)

226
---------------------------
set
Syntax:
set get-community
set set-community
set trap <#> [port] [community]
Description:
The Set here is used for the setup of get-community, set-community, trap host ip,
host port and trap- community.
Argument:
<#>: trap number, range: 1 to 6
: ip address or domain name
: trap port
: community name
Possible value:
: 1 to 6
:1~65535
Example:
FEL2SW-26 (snmp)# set get-community public
FEL2SW-26 (snmp)# set set-community private
FEL2SW-26 (snmp)# set trap 1 192.168.1.1 162 public
---------------------------
show
Syntax:
show
Description:
The Show here is to display the configuration of SNMP.
Argument:
None.
Possible value:
None.
Example:
FEL2SW-26 (snmp)# show
SNMP : Enable
Get Community: public
Set Community: private [Enable]
Trap Host 1 IP Address: 192.168.1.1 Port: 162 Community: public
Trap Host 2 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 3 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 4 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 5 IP Address: 0.0.0.0 Port: 162 Community: public
Trap Host 6 IP Address: 0.0.0.0 Port: 162 Community: public