KTI Networks KS-2262 - Manual (Page 219)

217
---------------------------
set pri-tag
Syntax:
set pri-tag [] [] [] []
Description:
To set 802.1p qos weighting for 4 queues.
Argument:
: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
: priority level. One queue has been assigned 2 different priorities.
You don't need to use all of queues, but must assign queues in order.
Syntax: 1,2 or 2,5-7, available from 0 to 7.
Possible value:
: 0 to 7.
Example:
FEL2SW-26 (qos)# set pri-tag q0 0 q1 2 q3 4
---------------------------
set sche
Syntax:
set sche
Description:
To set qos schedule and weight for 4 queues.
Argument:
: scheduling weighted round robin method
: scheduling strict method.
: weighted for every queue. Weighted range : 1-55.
Possible value:
: wrr or strict
: 1-55.
Example:
FEL2SW-26 (qos)# set sche wrr 1 2 8 16
---------------------------
set tos
Syntax:
set tos [] [] []
[]
Description:
To set IP tos qos weighting for 4 queues.
Argument:
: Delay Priority: 0;
Throughput Priority: 1;
Reliability Priority: 2;
Monetary Cost Priority: 3.
: queue level, q0: queue 0; q1: queue 1; q2: queue 2; q3: queue 3.
: priority level. One queue has been assigned 2 different priorities.
You don't need to use all of queues, but must assign queues in order
(from low queue to high queue).
Syntax: 1,2 or 2,5-7, available from 0 to 7.