KTI Networks KS-2262 User Manual
Page 255

253
 
Management Software Specifications 
 
 
 
System Configuration
Auto-negotiation support on 10/100Base-TX 
ports, Web browser or console interface can 
set transmission speed (10/100Mbps) and 
operation mode (Full/Half duplex) on each port, 
enable/disable any port, set VLAN group, set 
Trunk Connection.
Management Agent
SNMP support; MIB II, Bridge MIB, RMON MIB
Spanning Tree Algorithm
IEEE 802.1D
VLAN Function
Port-Base / 802.1Q-Tagged, allowed up to 256 
active VLANs in one switch. 
Trunk Function
Ports trunk connections allowed
IGMP
IP Multicast Filtering by passively snooping 
on the IGMP Query. 
Bandwidth Control
Supports by-port Egress/Ingress rate control
 
 
 
Quality of Service (QoS) 
Referred as Class of Service (CoS) by the 
IEEE 802.1P standard 
Four queues per port 
Packet transmission schedule using Weighted 
Round Robin (WRR) 
User-defined weight 
Classification of packet priority can be based on 
either a VLAN tag on packet or a user-defined 
port priority. 
Port Security
Limit number of MAC addresses learned per 
port static MAC addresses stay in the filtering table. 
 
 
Internetworking Protocol 
Bridging : 802.1D Spanning Tree 
IP Multicast : IGMP Snooping 
 IP Multicast Packet Filtering 
 Maximum of 256 active VLANs 
 and IP multicast sessions 
 
 
 
Network Management
One RS-232 port as local control console 
Telnet remote control console 
SNMP agent : MIB-2 (RFC 1213) 
 Bridge MIB (RFC 1493) 
 RMON MIB (RFC 1757)-statistics 
 Ethernet-like MIB (RFC 1643) 
Web browser support based on HTTP Server 
and CGI parser TFTP software-upgrade capability. 
Note: Any specification is subject to change without notice.
