KTI Networks KS-2262 - Manual (Page 231)

229
FEL2SW-26 (stp)# set version rstp
---------------------------
show config
Syntax:
show config
Description:
To display the STP configuration data.
Argument:
None.
Possible value:
None.
Example:
FEL2SW-26 (stp)# show config
STP State Configuration :
Spanning Tree Protocol : Enabled
Bridge Priority (0-61440) : 61440
Hello Time (1-10 sec) : 2
Max. Age (6-40 sec) : 20
Forward Delay (4-30 sec) : 15
Force Version : RSTP
---------------------------
show port
Syntax:
show port
Description:
To display the port information of STP.
Argument:
None.
Possible value:
None.
Example:
FEL2SW-26 (stp)# show port
Port Port Status Path Cost Priority Admin Edge Port Admin Point To Point
==== =========== ========= ======== =============== ====================
1 DISCARDING 2000000 128 Yes Auto
2 DISCARDING 2000000 128 Yes Auto
3 DISCARDING 2000000 128 Yes Auto
4 DISCARDING 2000000 128 Yes Auto
5 DISCARDING 2000000 128 Yes Auto
:
:
:
23 DISCARDING 200000 128 No Auto
24 DISCARDING 200000 128 No Auto
25 DISCARDING 20000 128 No Auto
26 DISCARDING 20000 128 No Auto