KTI Networks KS-2262 - Manual (Page 245)

243
---------------------------
enable symmetric
Syntax:
enable symmetric
Description:
To drop frames from the non-member port.
Argument:
None.
Possible value:
None.
Example:
FEL2SW-26 (vlan)# enable symmetric
---------------------------
set mgt-vlan
Syntax:
set mgt-vlan [vid]
Description:
To assign a management vlan to prevent DoS attack.
Argument:
state: enable or disable this feature
vid : management vlan id
Possible value:
state: 0 for disable; 1 for enable
vid : 1 to 4094
Example:
FEL2SW-26(vlan)# set mgt-vlan 1 1
---------------------------
set mode
Syntax:
set mode
Description:
To switch vlan mode between port-based and tag-based modes.
Argument:
: port or tag
tag: set tag-based vlan
port: set port-based vlan
Possible value:
: port or tag
Example:
FEL2SW-26 (vlan)# set mode tag
---------------------------
set port-group
Syntax:
set port-group
Description:
To add or edit a port-based vlan group.
Argument: