KORG D1600 - Manual (Page 39)

KORG D1600 Guided Tour
39
Write and finalize a CD:
9. Press the CD-R/CD-RW drive eject button, then insert a blank CD-R disk and press to close the drive
bay.
10. Press the SONG key, then press the “CDR/RW” tab.
11. Press the “WriteToCD” button, and a “Copyright” dialog box will appear.
12. Select the write speed (2x or 4x) by pressing the “4x” button, then press the “Yes” button. The writing
process will begin, and when the display indicates “Completed”, press the “Yes” button.
13. Select the next song in the “SongSel” tab, then press the “CDR/RW” tab, and continue from step 3
above. Note: All songs must be in two track format (tracks 1 and 2) before writing to CD.
14. Once all of the songs are written to CD, press the “Finalize” button, then press the “Yes” button. When
the finalizing is completed, the CD will automatically eject.
Playback the new song from CD:
15. Re-insert the CD in the drive , then press the INPUT/TUNER key, and set input channels 1 and 2 to “CD-
L” and “CD-R”.
16. Press the SONG key, then press the “CDR/RW” tab.
17. Press the “Play/Stop” button to playback the CD:
Tip: For more information on CD mastering with the D1600, see the Owner’s Manual, page 49 and 91.