KORG D1600 - Manual (Page 10)

KORG D1600 Guided Tour
10
SCRUB mode:
1. STOP playback, then press the SCRUB key. Here you can view track waveform data (selected by the
“>” popup button next to “1Tr”), and use the “ZOOM” buttons to resize the waveform. Once you’ve
selected a track, you can use the DIAL to scrub the audio.
2. Press the “OK” button in the display to return to the previous page.
Tip: Pressing the FF key while the SCRUB function is ON sets the audio data to play back at half-speed - an
octave lower than the original pitch. This is a great way to rehearse and learn intricate solo lines!
Note: More “hands-on” work with the SCRUB function later in this guide.
TUNER mode:
The D1600 features a built-in auto-chromatic tuner!
1. STOP playback, then press the INPUT key, followed by pressing the “Tuner” tab. Here, you can tune an
instrument connected to the INPUT 8 / GUITAR IN jack.
When you select the “Input 8” radio button, you can precisely tune connected instruments. If you select the
“Track” radio button you can check the tuning of any previously recorded track!
The Scrub function and TouchView waveform display give you precise control
when working with your tracks!