KORG D1600 User Manual

Page 20

KORG D1600 Guided Tour

Try the “Play From” function:

9. Press

the

PLAY key. The audio data will begin playback at the currently stopped position, and play for

two seconds, before automatically returning to the stored locate point.

Try the “Play To” function:

10. Hold the STOP key and press the PLAY key. Watch the display, as playback begins two seconds before

the currently stopped position and stops at the stored locate point.

Try the “Slow Play” function:

11. The

Slow Play function lets you playback audio at half-speed, one octave below the normal pitch. This

feature is good for learning and practicing difficult phrases. To do this: While playback is stopped, press
the FF key. The track will playback at half-speed.

12. Press

the

STOP key, and you’ll return to the stored locate point.

13. Press

the

“OK” button to exit SCRUB mode.

Note: When selecting SCRUB mode, all tracks are set to green (Play status).

Assign and work with a new Insert effect for Track 3:

14. Make sure playback is STOPPED, then press the INSERT EFFECT key.

15. Press

the “InsAss” tab in the lower left of the display.

16. Refer to the diagram below, and press the “InsertTo” popup button in the display:

17. Press the Insert effect 2 "2" track parameter, then rotate the DIAL to select “3”:

18. Press

the “OK” button in the display. You’ve just assigned Insert effect 2 to Track 3.