D1600 guided tour getting started – KORG D1600 User Manual
Page 3
KORG D1600 Guided Tour
3
D1600 Guided Tour
Getting Started:
D1600 Hard Drive Installation: Detailed instructions for installing the included 20GB hard drive in the
D1600 drive bay are located in the original shipping carton, and in the Owner’s Manual, page 134.
Audio connections: Connect the rear panel MONITOR L / R
outputs to a stereo monitoring system for
playback/recording, and connect headphones to the front panel PHONES jack.
Note: Use the rear panel
MASTER L/R outputs when mastering to external DAT, MD, etc.
Recording sources for this guide: You'll be recording with an external microphone for some of the
exercises in this guide. You’ll need a lo-impedance microphone (or condensor mic) and cable.
Important!
Make sure that the PHANTOM POWER switch is set to
OFF
(Inputs 1-4) when connecting
unbalanced/ non-condensor microphones! Also, the PHANTOM POWER switch must be set to
OFF
before
connecting a mic that requires phantom power, or serious damage to your mic could result! Switch it
ON
after connection.
Objects referred to in this guide:
D1600 top panel
objects that you'll work with are: Keys, Dial, Faders
and Pan knobs.
D1600 TouchView
objects that you'll work with are: Tabs, Popup and Radio buttons,
Dialog boxes and Icons.