Kurzweil KSP8 TM - Manual (Page 83)

Master Mode
The Master Mode Page
Preliminary - Subject to Change 11-1
Chapter 11
Master Mode
Press the Master mode button to enter Master mode, which contains parameters affecting the
PC3’s overall performance.
When you exit Master Mode it saves a Master Table which is basically the state of the PC3, so it
will remember what programs are assigned to what Channels and such. Explicit saving of the
Master Table is also possible.
You can also enter the Boot Loader via Master Mode.
There is now a Clock in the system which should time- stamp your files if you set it correctly.
Reset will delete all of your User objects. The Digital Out Mode goes up to 192K and Syncs to
External Clock!
The Master Mode Page
On the Master mode page you’ll find parameters for setting the overall tuning and transposition
of the PC3, sampling rate for digital output, and for several keyboard and programming
adjustments.
Parameter Range of Values Default
Tune ± 100 cents 0
Transpose ± 60 semitones 0
Velocity Touch Velocity Map list 1 Linear
Pressure Touch Pressure Map list 1 Linear
Intonation Intonation Table list 1 Equal
IntonaKey C–B C
Digital Out Mode Muted, 44.1 KHz – 192 KHz, Ext 44.1 KHz
General MIDI On, Off Off
Numeric Entry Global, Bank Global