Kurzweil KSP8 TM - Manual (Page 76)

10-6 Preliminary - Subject to Change
MIDI Mode
The Channels Page
The Channels Page
Press the CHANLS soft button to select the CHANNELS page, where you can define numerous
parameters for each MIDI channel independently. Use the Chan/Layer buttons to select the
MIDI channel you wish to work on.
The CHANNELS page is very useful when you’re doing multi-timbral sequencing, with
programs assigned to numerous MIDI channels. The CHANNELS page lets you set several
control characteristics for each MIDI channel. This makes it easy to adjust the playback of the
sequence without editing the sequence itself. For example, you might turn off the Enable
parameter for one or more channels to mute the tracks on those channels. You could also set the
VolLock parameter to On, to ignore any MIDI volume messages the PC3 receives on a given
MIDI channel.
Enable
Use this parameter to turn the currently selected channel on or off. When on, the channel will
receive MIDI information, and the settings of the parameters on the MIDI CHANNELS page
will be in effect. When off, the channel will ignore all MIDI information.
Program
Use this parameter to assign a program to the currently selected channel. The channel will still
respond to program change commands received via MIDI, unless the PrgLock parameter
(described below) is set to On.
Parameter Range of Values Default
Enable Off, On On
Program Program list Program ID 1
Pan 0 to 127 64 (centered)
Volume 0 to 127 127 (maximum)
Program Lock Off, On Off
Pan Lock Off, On Off
Volume Lock Off, On Off