Kodak A-61555 - Manual (Page 87)

5-14 A-61555 May 2010
The Count Only screen will be displayed.
5. Touch Scan.
6. Remove the transport cleaning sheet from the output tray and place
it in the center of the input elevator in landscape orientation with the
adhesive side down and touch Scan.
7. When finished, touch End Job.
NOTE: When the transport sheet gets dirty, discard it and use a new
one.
Final cleaning steps When finished running the transport cleaning sheet:
1. Open the pod.
2. Wipe the exposed side of the upper and lower imaging guides with a
lint-free cloth.
3. Close the pod and scan a test image to ensure image quality.