Kodak A-61555 - Manual (Page 83)

5-10 A-61555 May 2010
Cleaning the imaging
guides — basic cleaning 1. Open the pod.
2. Wipe the upper and lower imaging guides with a Staticide wipe.
IMPORTANT: Staticide wipes contain isopropanol which can cause eye
irritation and dry skin. Wash your hands with soap and
water after performing maintenance procedures. Refer to
the MSDS for more information.
3. Wipe the upper and lower imaging guides again with an almost-dry
Staticide wipe to remove any streaks.
4. When finished, close the pod.