Kodak A-61555 - Manual (Page 41)

A-61555 May 2010 3-23
Enabling/disabling image
addressing An image address is a unique identifier assigned to each individual
document and may contain up to 30 characters (up to a maximum of 27
characters, plus 3 delimiters). An Image Address template is set up
using the TWAIN Data source or ISIS Driver. See the on-line help file
for more information on image addressing or the Scanning Setup Guide
PDF located on the installation CD. You can enable or disable image
addressing from the touchscreen.
IMPORTANT: If you change this setting, you will need to power
cycle the scanner.
1. From the Idle screen, select Settings to display the Settings screen.
2. Touch Image Address. The following screen will be displayed.