Kodak A-61555 - Manual (Page 32)

3-14 A-61555 May 2010
Adjusting the height
of the scanner The workspace table can be raised approximately 25.4 cm (10 in.) from
its lowest position for your comfort when you are sitting or standing at
the scanner. When you are raising or lowering the workspace table, be
sure that there is nothing close to the scanner that would interfere with
the upward and downward movement (e.g., chair, table, etc.).
• Press the upper portion of the button on the control panel to raise to
workspace table.
• Press the lower portion of the button on the control panel to lower the
workspace table.
If the workspace table will not move up or down from its position, check
the following:
• Be sure the front and/or rear access doors are securely closed.
• Be sure the workspace table is not already in its highest or lowest
position.
• Be sure the scanner is on and is not in Power Saver mode.