New features, Firmware 3.x.x or higher – Kodak A-61555 User Manual
Page 6
1-2
A-61555 May 2010
New features
These features are for Kodak i1800 Series Scanners, Firmware Version
2.1.1 (or higher).
• Fast elevator — the elevator speed is twice as fast as the previous
versions of the Kodak i1800 Series Scanners.
• Quick reload — allows you to quickly reload small stacks of
documents before the elevator returns to the original Paper Source
position (e.g., 250 Sheet, 500 Sheet, etc.). For example, if the Paper
Source position is set to 500 Sheets and there are several small
batches of documents that you want to scan separately, this feature
allows you to place the documents in the elevator tray as soon it is
descending. The elevator will immediately rise to the feeding position
before returning to the 500-sheet Paper Source position.
• Fragile Document Mode — allows you to feed poor quality
documents through the scanner transport at a slower pace for more
reliable stacking.
Firmware 3.X.X or
higher
• With firmware 3.x.x or higher and the most current TWAIN
Datasource/ISIS Driver, you can choose to scan different resolutions
(dpi) on the front and rear page images when scanning in duplex
mode.
• Maximum page length has been increased to 40 inches (101.6 cm).