Kawasaki STX-15F - Manual (Page 321)

HULL/ENGINE HOOD 13-15
Hull Replacement
To replace the hull, remove the various parts in the follow-
ing suggested order.
Battery and Pad
Exhaust Pipe and Expansion Chamber
Inlet Manifold
Engine and Mounts
Air Filter
Water Box Muffler
Drive Shaft and Shaft Holder
Pump and Hoses
Steering Cover
Handlebar and Steering
Steering Cable
Reverse Cable
Crossmember
Fuel Tank and Filler
Bilge and Cooling System Hose
Bypass Hose and Outlet
Bumpers
Engine Hood Latch
Front Storage Compartment Cover and Brackets
Handgrip
The following parts cannot be removed from the hull and
must be replaced.
Decals
Labels
Mats
Registration Number (if any)
If the new hull is to be painted, do that first. Then install
removed parts in the reverse order of their removal. Finally,
install the labels, decals, mats and the registration numbers.