Kawasaki STX-15F - Manual (Page 256)

9-10 COOLING AND BILGE SYSTEMS
Water Pipe
Water Pipe Removal
•
Remove the inlet manifold (see Fuel System).
•
Disconnect the cooling hose [A] onto the water pipe fitting.
•
Unscrew the mounting bolts [B] and remove the water
pipe [C] from the cylinder head [D].
Water Pipe Installation
•
Apply grease to the O-rings [A] and install the water pipe
with the mounting bolts.
•
Install cooling hose [B] (cylinder head ∼ water box muffler)
to the water pipe fitting and secure the hose clamp [C].