Konica Minolta Q-M100 - Manual (Page 92)

[For reference]
■ For playback in the area of PAL TV system
Change the camera's playback output setting for a TV set refer-
ring to the instructions of the camera.
・
West European countries
except France
・ China
・ Australia
・ New Zealand
・ Singapore
・ Brazil
・ Malaysia, etc.
■ For playback in the area of NTSC TV system
The camera need not change the setting for playing back pictures
with a TV set.
・
U.S.A.
・ Korea
・ Canada
・ Taiwan
・ Cuba
・ Chile
・ Guam
・ Mexico
・ Japan, etc.
■ In the area of SECAM TV system
TV systems in main countries
・
A TV set or video monitor having a video input connector of
either NTSC or PAL TV system can be used for playing
back pictures taken by the camera.
・ For connecting the camera with such a TV set or video
monitor, a VIDEO OUTPUT cord supplied with the camera
is necessary.
・ On shipment, this camera is set for the NTSC TV system for
playback of pictures with a TV set of the PAL TV system (in
the PAL TV area), switch the setting of the video output of
the camera to the PAL TV system.
・ Pictures cannot be played back with a TV set of the SECAM
TV system (in the SECAM TV area).
In the area of SECAM TV system (France, Russia, etc.), pictures
taken by the camera cannot be played back with a TV set.
* Even in the SECAM TV system area, pictures can be played
back on a TV screen if a TV set that is compatible with the PAL
TV system is available. On such an occasion, set the camera's
playback output for the PAL TV system.
NOTE: For the TV broadcasting system of the area, inquire at an
electric appliance store.