Konica Minolta Q-M100 - Manual (Page 58)

2. Press the shutter release button halfway, and the focus and exposure are
locked.
Press the shutter release button furthermore, and the shutter is opened to
record the same image as shown on the LCD monitor.
* The image to be recorded is shown through recording. With completion
of recording, the monitor returns to the “through image display” status.
3. If the monitor power switch is pressed again, the LCD monitor is turned
off and the camera status is restored to the normal shooting mode.
* Since use of the LCD monitor considerably consumes the battery power,
be careful to turn on/off the LCD monitor frequently or to use an AC
adaptor. Therefore, it is recommended to use an AC adaptor for operat-
ing the LCD monitor.