Konica Minolta Q-M100 - Manual (Page 36)

Switching flash mode
● Each time the flash mode switch is pressed, one of five flash modes
appears in turn on the data display panel.
* The flash mode set once is fixed for continuous shooting, but it is reset
to the “AUTO” (automatic flash) mode when the lens barrier is opened
again after it was once closed.
* While the red lamp is on after flash photography, the shutter release
button is locked because the flashlight is being charged.
1. When the lens barrier is opened with a CF card set in camera, the flash
mode is set to the “AUTO” (automatic flash) mode (preset normal mode).
In this mode, the flashlight is automatically actuated for dark objects.