Konica Minolta Q-M100 - Manual (Page 72)

4. Press the SET button. Three erasing modes are shown on the screen.
Press the SELECT button ( or ) to select “This”, “NO” or “ALL”.
* If the MENU button is pressed at this stage, the display returns to the
status of the step 3.
* If the selected frame is protected against erasing, “This” cannot be se-
lected but “NO” or “ALL” can be selected.
To erase a protected frame, cancel the setting of frame protection.
If the SET button is pressed with selection of “NO”, the display returns to
the status of the step 1.
5. If the SET button is pressed with selection of “This”, the frame selected in
the step 2 is erased.
When erasure of the selected frame is complete, the display returns to
the status of the step 1.
* If the MENU button is pressed for the SET button at this stage, the dis-
play returns to the status of the step 3.