Setting calendar and clock – Konica Minolta Q-M100 User Manual

Page 23

Text mode
Original mode

Setting calendar and clock

●

Before starting calendar setting, make sure that batteries are properly set

in the camera or a specified AC adaptor is connected to supply power to
the camera and the lens barrier is closed (the lens barrier switch is set at
“CLOSE”).

●

When you press the MONITOR POWER switch for the first time since

you got the camera, you have access to the scene of the following step 4
for setting the calendar and clock. On such the occasion, be sure to set
the calendar and clock correctly first of all.

1. Press the monitor power switch to turn on the LCD monitor.

* When no CF card is set in the camera or no picture is recorded on the

inserted CF card, a message “No pictures in camera” appears on the
LCD monitor.