Konica Minolta Q-M100 - Manual (Page 49)

2. Press the MENU button once. The “Erase” icon is reversely shown on the
screen.
* If the MENU button is pressed again in this status, the last operation is
canceled and the display of the previous step 1 appears again.
3. Press the SELECT button ( ) twice.
The “Brightness adjustment” icon reversely appears on the screen
(“Brightness adjustment” menu).
* When the SELECT button ( ) is pressed seven times, the same display
appears on the screen. If you fail in accessing the “Brightness adjust-
ment” menu, press the SELECT button ( or ) repeatedly until you
access the menu.
* If the MENU button is pressed in this status, the previous operation is
canceled and the display on the LCD monitor is changed for that of the
previous step 1.