Konica Minolta Q-M100 - Manual (Page 53)

2. Connect the video output cord (supplied with the camera) to the camera's
video port and the video input terminal of a TV set.
After connection between the camera and a TV set is complete, turn on
the TV set and set the input source selector of the TV set to “VIDEO”.
3. Press the monitor power switch, and the last frame recorded on the CF
card is played back on the TV screen.
* When no CF card is set in the camera or a CF card on which no picture
data is recorded is set in the camera, a message “No pictures in cam-
era” appears on the monitor screen.
When a valid CF card is set in the camera, use the SELECT button to
select desired frames.