Konica Minolta Q-M100 - Manual (Page 50)

4. Press the SET button. The camera enters the LCD monitor brightness
adjustment mode.
The cursor in the center indicates the standard level.
5. If the SELECT button is pressed, the cursor moves rightwards (to “+”
side) and the screen becomes brighter.
If the SELECT button is pressed, the cursor moves leftwards (to “-”
side) and the screen becomes darker.
● Press the SELECT button ( or ) to adjust the brightness of the LCD
monitor as desired.
* If the MENU button is pressed in this stage, the previous adjustment is
canceled and the brightness is reset to the level saved last. At the same
time, the display is changed for that of the previous step 3.