Kenwood HM-332 - Manual (Page 9)

Preparation section
9 Controls and indicators
Display
( The displays given in this manual are approximations only.
They may differ from what actually appears on the display.)
1 23 4 5
6 7
#
8 9 0
!
@
1 Indication related to CD
2 MUTE indicator
3 SLEEP indicator
4 RDS indicatior (except for some areas)
5 Auto Power Save indicator
6 Selected selector indicator
7 O.T.E. (ONE TOUCH EDIT) indicator
Appears during one-touch recording.
8 Reverse mode and TAPE equalizer (TAPE EQ.) indi-
cators
9 Timer-related indicators
0 Tuner-related indicators
! EX.BASS indicator
@ LOUD (Loudness) indicator
# Character information display section
Shows character information including the input selection,
volume level and disc/track title. Frequency indication, time
indication, track No., program No., etc.
AUTO POWER SAVE function
When the unit is ON and the unit is left for 30 min-
utes with CD and TAPE not operating, the unit is
switched off automatically by this function. This is
convenient when you forgot to switch off the unit.
This function can be activated or deactivated by the
following operation.
menu
down
volume/
multi control
up
down
volume/
multi control
up
menu
down
volume/
multi control
up
down
volume/
multi control
up
set/demo
set/demo
set/demo
1 Select “A.P.S. SET?”.
2 Select.
(Press the set/demo key while the “?” mark is
blinking.)
3 Set it.
Display panel control
Controlling the BACK LIGHT
The brightness of the main unit display can be ad-
justed.
1 Turn power ON and press the menu key.
2 Rotate the volume/multi control knob to
select "BACK LIGHT?" and press the set/
demo key.
3 Rotate the volume/multi control knob to
select the desired light brightness ("High" or
"Low") and press the set/demo key.
÷ When the SLEEP timer has been set, the light is "LOW"
regardless of the BACK LIGHT setting.
÷ When the TUNER or AUX input is selected, APS
operates only when the volume is set to zero or when
MUTE is on.